社区论坛 › 电脑教室 › 一个关于USB3.0的问题

comcom 发表于 2013-3-6 01:16:03

eternal 发表于 2013-3-6 00:55 static/image/common/back.gif
maybe very difficult toreplace a new socket,because the socket on the I/O panel.

The only solution is using a USB hub get connection from the back or install a multi-function I/O panel. {:7_232:}

eternal 发表于 2013-3-6 01:25:12

comcom 发表于 2013-3-6 01:16 static/image/common/back.gif
The only solution is using a USB hub get connection from the back or install a multi-function I/O...

USB hub also is a good choice ,but most people will use back I/O panel → USB3.0 cable → front I/O panel instead of front I/O panel + 19pin.{:9_397:}

vinflg 发表于 2013-3-6 01:37:41

che5527472 发表于 2013-3-6 01:03 static/image/common/back.gif
我有个 USB3.0的U盘，插在USB3.0接口能用，USB2.0的接口就是不能用！我也不知道什么原因！

:o同病相怜啊！~

vinflg 发表于 2013-3-6 01:39:57

eternal 发表于 2013-3-6 00:55 static/image/common/back.gif
maybe very difficult toreplace a new socket,because the socket on the I/O panel.

求中文注解;P

vinflg 发表于 2013-3-6 01:42:36

comcom 发表于 2013-3-6 00:46 static/image/common/back.gif
Seem problem not from motherboard, please check the socket in front or replace a new socket.

Problem not only from the PC.....but also in my wallet！{:9_374:}

eternal 发表于 2013-3-6 01:43:58

vinflg 发表于 2013-3-6 01:39 static/image/common/back.gif
求中文注解

你笑 即係明啦 唔好玩野{:10_468:}

eternal 发表于 2013-3-6 02:04:00

vinflg 发表于 2013-3-6 01:42 static/image/common/back.gif
Problem not only from the PC.....but also in my wallet！

裝過driver都唔得就插後面算啦 反正2.0會淘汰 遲d用晒3.0就咩問題都冇{:9_394:}

kristos 发表于 2013-3-6 02:28:10

3.0可以用2.0.呢个係定律.毋庸置疑.
至于点解你果度会咁.睇嚟要做个Body Check~

che5527472 发表于 2013-3-6 16:01:29

不知道是不是USB2.0接口的供电不够？

LHospital 发表于 2013-3-6 18:34:44

Intel chipset (H77, Z77, B75) 原生只有最多4個USB3.0接口，其他要靠onboard chip如NEC、ASMedia等，你有冇在bois裡set 番個"USB Legacy Support" "HS Port Switchable"同埋 "xHCI and EHCI Hand-on"？

查看完整版本: 一个关于USB3.0的问题